T+A CALA CDR, Руководство пользователя, Страница: 17 / 72

17
This is the basic rule: the smaller the speaker cabinet, the higher the
cross-
over frequency should be. The “Bass extd.” setting is
recommended for small loudspeakers such as small bookshelf units, if
they are operated without a sub-woofer. At this setting the bass range of
the speaker is extended to low frequencies.
Sub-point
SPK stand ...
If loudspeakers are set up close to a wall or a corner, the result may be a
disproportionate boost to the low frequencies. To compensate for this
effect please select one of the set-up options
free / near to wall / in a corner / shelf,
according to the location of your loudspeakers.
Sub-point
Room
The purpose of this menu is to fine-tune the to match the
acoustics of your listening room. For highly damped rooms it is advisable
to select one of the “absorptive” settings 1 - 4.
The “reflective” settings 1 - 6 help to reduce any reverberant effects.
If your listening room is normally damped, this setting should be left at
“normal”.
Sub-point
Subwoofer
In this menu point you can set the cross-over frequency for your sub-
woofer. If your system does not include a sub-woofer, you should choose
the “OFF” setting.
Sub-point
OUT / Phones
In this menu point you can disable the room correction settings for the
use of
headphones. Choose the setting “phones” to bypass the room
correction and choose the setting “OUT” if e.g. active speakers are
connected, for which the room correction is eventually required.
 Is the setting „
phones
“ selected, the settings for the menu items „
Room
“
(System settings menu
) and „
Contour presence
“ and „
Contour
fundamental tone
“ (Tone menu) have no effect to the phones- and
Analog OUT sockets.
Menu item
Source
settings
This menu point opens a sub-menu in which the individual sources
connected to the
can be configured.

Not all the set-up options are available for all sources.
Sub-point
Available
The purpose of this menu point is to disable / activate the corresponding
source.

Disabled sources do not appear in Source Select when you operate the
remote control handset, and this makes it easier to select the correct
source. It is therefore advisable to disable all sources which you do not
use.
Sub-point
Source name
At this menu item you can assign a plain text name to each source; this
name then appears in the screen displays.
When you call up this menu item using the

button, a list of all the
internal and external sources of the appears.
To change the plain-text name, move to the appropriate line and press
the

button. Now use the alpha-numeric keypad of the FM1000 to
change the name as required, then confirm your choice with

; this
saves the settings for that source.