T+A 2000 R Series, Руководство пользователя

Страница: 55 / 76

55
The Configuration for a WLAN connection
Setting the parameters for a
wireless network

Check that there is no cable connected to the LAN socket of the MP 2500 R .

Switch the MP 2500 R on, open the System Configuration menu by pressing
the

button on the remote control handset or the

button on the
front panel of the MP 2500 R .

Use the

/

buttons to select the menu point “
Network
”, then
confirm your choice with the

button.
The following menu now opens:
Possible entries
Selecting and connecting a WLAN by hand
Searching for and Selecting
the Network

First select the menu point “
Scan for WLANS
”, and activate it by
pressing the

button.

A list of the WLANs found is displayed on the screen.

Use the

/

buttons to select the WLAN to which you
wish the MP 2500 R to be connected, and confirm your choice with the

button.
Entering the Password (for
encoded networks)
If the network is encoded, the window shown below will appear once the WLAN
is selected.

At this point please enter the network passphrase and confirm your
input by pressing

.

Select the “
Store and exit?
” point, and confirm your choice with

.
Storing Network Settings
and Restarting
Finally select the “
Store and exit?
” menu point and press the

button to
accept the settings.

If a WEP code is used, the password must be entered as a hexadecimal code
(0 - 9, A - F).