T+A 2000 R Series, Руководство пользователя

Страница: 58 / 76

58
FD 100 Radio Remote Control
(optional)
The MP 2500 R can be controlled remotely using the FD 100 bi-directional
radio remote control handset if a Gateway module is installed; this is available
as an optional extra. The
FD 100 features an integral full-colour screen which
provides a convenient means of controlling virtually all the MP 2500 R
’s
functions, even when there is no direct line-of-sight contact with it. The handset
can also display information relating to the selected source or the medium
currently playing.
Connecting the radio aerial Since the FD 100 operates by a radio link, an aerial must be connected to the
MP 2500 R . This is connected to the socket on the MP 2500 R marked
‘Remote’.
*
The aerial should be free-standing in order to obtain maximum
effective range.
Pairing the FD 100 Before the MP 2500 R can be controlled using the FD 100, the remote control
handset must first be registered to the MP 2500 R . This process is known as
pairing, and only has to be carried out once. The procedure is as follows:

Press the

button on the MP 2500 R to call up the
Configuration menu.

Rotate the SELECT knob on the front panel to select the “
FD 100
pairing
” menu item, and confirm your selection by pressing the
SELECT knob.

To confirm the pairing process of the FD 100, press the SELECT knob
until the menu entry changes to 'waiting for FD 100'. (the function
remains active for thirty seconds).

Locate the

button on the FD 100 and hold it pressed in to
open the FD
100’s
System Settings menu.

Now select the ‘Start pairing’ point, and press the

button: the
remote control handset automatically seeks the MP 2500 R .

Once the device is found, you will see in the display header the on-
screen message ‘Pairing successful’. At the same time changes the
menu entry of the
MP 2500 R to 'Done'. If you wish, you can change
the name of the device at this point (eg. 'Living room' if more than one
device is available).

Confirm the name with the

button.

For faster access the MP 2500 R can also be assigned to a Hotkey;
this is the next step (see FD 100 operating instructions).

Select one - or optionally none -
of the ‘F’ buttons, and confirm your
choice by pressing the

button.

The FD 100 is now paired with the MP 2500 R , and is ready for use.

For detailed information on using the FD 100 please refer to the operating
instructions supplied with the remote control handset.