background image

Satchwell

TM

Satchwell

Data Sheets

Controllers
DS 2.021 - CSC

Multi-Lingual Instructions

MLI 2.001 - Mounting Details

7-DAY OPTIMISER

The SVT is a fuel-saving controller which can replace a conventional 
time switch on a heating system and provides a variable start time 
dependent on the fall of room temperature during the off period.

It is used to switch on and off central heating systems and will 
substantially reduce fuel consumption compared with fixed time 
starting. In all but the very coldest weather the start time is delayed until 
the latest time consistent with the amount of heat necessary to regain 
the required temperature at occupancy time. In very mild weather this 
delay can be as much as five hours later than in cold weather and fuel 
savings of between 10% and 25% are possible.

By relating the start time to the inside temperature rather than the 
outside temperature, the insulation and thermal mass of the building 
are taken into account.

The SVT makes the benefits of optimum start control available for 
small buildings because the capital outlay for the installation is low and 
no skilled personnel are needed to operate it.

FEATURES

Easy installation - only one sensor required (packed with the 
controller)

Programme override switch

Choice of day control by separate compensator or built-in 
on/off day control

Minimum night 'inside' temperature

Analogue and Digital clock versions available

SVT

Содержание Satchwell SVT











Отзывы: