SZGH SZGH-CNC1000MDb Series, Руководство пользователя

Страница: 149 / 223

-Shenzhen Guanhong Automation Co.,Ltd.- SZGH-CNC1000MDb Series
- 136 -
6.6.6 Alarm
The screen hints alarm message when machine tool alarm, CNC system will stop processing.
Only after clear alarm,and then CNC system can processing.
There are some fixed alarm,cannot be changed ,as following
Alarm Hinting Message Input Point
X-axis driver has happened hardware limit -L(PIN15_CN3 Plug)
+L(PIN16 _CN3 Plug)
Y-axis driver has happened hardware limit
Z-axis driver has happened hardware limit
A-axis driver has happened hardware limit
B-axis driver has happened hardware limit
X-axis,Y-axis,Z-axis,A-axis,B-axis driver is alarming
ALM(PIN12_CN5 Plug)
Spindle driver is alarming ALM1(PIN5_CN3 Plug)
Emergency Stop Stop(PIN5_CN11 Plug)
There are also some user-defined alarm as following
Alarm Hinting Message Auxiliary Relay in PLC
No.0 Alarm M80
No.1 Alarm M81
No.2 Alarm M82
No.3 Alarm M83
No.4 Alarm M84
Protect Door Is Open M85
No.6 Alarm M86
No.7 Alarm M87
Loss of Lubricate Oil M88
No.9 Alarm M89
No.10 Alarm M90
No.11 Alarm M91
+5V Undervoltage M92
+24V Undervoltage M93
No.14 Alarm M94
No.15 Alarm M95
Note: these alarm hinting message & input point can be edited as user’s asks on PLC.
Input point for protect door: M12, PIN11 of CN10 Plug
In Other parameter:
P7: Detect switching signal of protective door, 0:no detect,1: yes
P8: Type of switch for protective door, 0: NO type, 1: NC type.
P17: Type of alarm for servo driver, 0: NO type, 1: NC type.
P18: Type of alarm for spindle, 0: NO type, 1: NC type.
P19: Type of alarm for machine tool, 0: NO type, 1: NC type.
P26: Type of switch for emergency stop in panel, 0: NO type, 1: NC type.
P27: Type of switch for emergency stop in CN11, 0: NO type, 1: NC type.
Note: Emergency STOP: Press “Emergency STOP” button when appearing emergent accident, machine
tool will stop all actions and the screen of system shows “Emergency STOP”. Wait for releasing the button.