SyxthSense Ltd
PS
TH6.12
- 3/4
WARNING:
To adjust properly room temperature, install the thermostat far from heat sources, draughts or
particularly cold walls (thermal bridges). When the remote sensor is used in conjunction with
the thermostat, then this note is to be applied to the remote sensor itself.
For remote version all wirings must be made using wires with 1.5mm
2
minimum section and
no longer than 25m. Do not use same duct for signal wires and mains.
The appliance must be wired to the electric mains through a switch capable of disconnecting
all poles compliant to the current safety standards and with a contact separation of at least
3mm in all poles.
Installation and electrical wirings of this appliance must be made by qualified technicians and
in compliance with the current standards.
Before wiring the appliance be sure to turn the mains power off.
Notes: In the view of a constant development of their
products, the manufacturer reserves the right for changing
technical data and features without prior notice. The
consumer is guaranteed against any lack of conformity for
24 months from the time of delivery, according to the
European Directive 1999/44/EC. The full text of guarantee
is available on request from the seller.
