SYXmoto KXD505, Руководство пользователя

Страница: 4 / 20

4
service@syxmoto.com
Compliance with the laws and directives
2006/42/EC MACHINERY DIRECTIVE
2004/108/EC EMC DIRECTIVE
97/68/EC ENGINE POLLUTANT DIRECTIVE
Assembling guide
1. Place the packing box on flat ground, then open it (use a scissors or box cutter).
2. Use #10 open-end wrench and #6 allen wrench to remove the packing metal (on models packed with
an iron cage, this step is not applicable).
1
st
step: Install the rear shock absorbers, tighten the nuts on both sides to 18.5-foot pounds of torque.
2 nd step: Install the front tires (make sure the tread pattern and air valve are to the outside), and tighten
the nuts to 26 – 32-foot pounds of torque
3
rd step: Install the handlebar (adjust to desired angles), and tighten nuts between 11–18-foot pounds
of torque.
4
th
step: Connect the battery cables. When you connect battery cables, the electric lock is in the "OFF”
position. Connect the positive terminal first, then the negative terminal. Disassembly is opposite.
If you do not understand the instructions, please contact your local retailer and get professional help
for assembly.
Chain Adjustment (This step should be checked regularly to ensure safety):
Adjust the Chain: Using your index finger, press lightly on the middle of the chain between the front
and rear sprockets. You should have about 0.5 in – 0.7 inches of free play. If it is not in this range,
please adjust the chain. (Please note: The left-side and right-side chain adjusters should be adjusted
at the same time to ensure the adjustment is the same on each side). To adjust the chain, loosen the
axel bolts. Then loosen or tighten the adjuster nuts to get the chain at the proper tension. Finally,
tighten the chain adjuster nuts, then the axel bolts.