Syvio HD Media Player 200A, Инструкция по эксплуатации

Страница: 13 / 14

22 23
INSTRUCTION
How to operate usb slave function?
This only applies to some models which ship with a USB-PC connector, which allows
connection of the NMT to the PC and the HDD on the NMT will appear as a USB HDD
to the PC.
1. Power up NMT unit, plug in the provided cable between the USB-PC connector to a USB
slot on your PC.
2. When the unit is idle or in Browser mode, it will immediately switch the internal HDD to make
it visible to the PC as a USB HDD.
3. During this period, the NMT can still function as a basic DMA, all NMT applications will be
stopped at this point, however.
4. Note that as the HDD on the NMT is formatted as a EXT3 partition by default, you will need
a special driver to support EXT3 on Windows PCs. Linux PCs will be able to support it without
additional drivers. A suggested driver is
EXT2FSD.
5. After completing your file operation on the USB HDD from your Windows PC, it is advised
to"Safely Remove Hardware" by clicking on the USB icon in the Windows taskbar before
unplugging the USB connection. Otherwise, a power cycle is required to get the internal
HDD back into normal operation.
6. When not using the USB slave function, it is advised not to leave the cable plugged in.
'' ''
'' ''
Technical specifications
Operating system: Linux
Network agreement: TCP/UDP DHCP FTP/TFTP SMB NFS HTML
Safe agreement:SSL2.0/3.0
File system:EXT3
Processor: Sigma Designs(SMP8635)
Memory:DDR400 (32MB*4)
Flashrom:256Mb
Hard disk:SATA interface
Support video format:
DIVX XVID VC-1 TP TS WMV WMV9 MPG DAT M2TS VOB AVI MOV MP4 MKV
Support audio format MPEG AUDIO PLAYER1&2 WMA OGG AAC AC-3 DTS FLAC WAV
Support picture format:JPEG GIF Bitmap PNG
Video output interface:S-video x 1 ; composite x1;Component x 1 ; HDMI(1.3a) x 1 (up to 1080P)
Audio output interface:Stereo x 1 ; SPDIF Coaxial x 1 Optic x 1
Data interface:USB2.0 Slave x 1 ; USB2.0 Host x 2 ;WIFI802.11N;Ethernet10/100M
Power DC+12V/3A