Syvecs X20-E8XX, Руководство пользователя

Страница: 8 / 18

Input Connections
Digital Inputs
These Inputs are able to swing above and below the reference ground meaning they can see Positive
Voltage as well as Negative. Fully adjustable trigger thresholds for the frequency decoding is
supported on these pins as well as optional 3k pull-ups to 5v. These are configurable via a USB
connection to X20 (see page 14).
Example of sensors normally used on these Inputs are:
- Reluctor Crank and Cam Sensors / ABS Sensors for wheel speed
- Hall Sensors
Pin Number Input
A3 DIG1 Optional 3k Pull-up
A12 DIG2 Optional 3k Pull-up
A4 DIG3 Optional 3k Pull-up
A13 DIG4 Optional 3k Pull-up
Voltage Inputs - AV Inputs
These Inputs are able to sense a Voltage level but not offer Frequency detection, some of these
inputs support a 3k Pull-up option which is turned on via a USB connection, explained on page 14.
Example of sensors which normally use on these Inputs are:
- Manifold Pressure sensors
- Throttle Positions
- Oil Pressures
- Thermistor (requires 3k pull to be enabled)
Voltage Inputs are not just limited to the above they can also be used for any sensor which outputs a
0-5volt signal.
Pin Number Input
A5 AV1 Optional 3k Pull-up
A14 AV2 Optional 3k Pull-up
A6 AV3
A15 AV4
A7 AV5
A16 AV6
B5 AV7 Optional 3k Pull-up
B13 AV8 Optional 3k Pull-up
B6 AV9 Optional 3k Pull-up
B14 AV10 Optional 3k Pull-up
B7 AV11 Optional 3k Pull-up
B15 AV12 Optional 3k Pull-up
B3 AV13
B11 AV14
B4 AV15
B12 AV16