Sytech SY-PV5, Руководство пользователя, Страница: 4 / 6

CHOICE OF WATER
•
This iron can be used with normal tap water.
•
If the water in your area is particularly hard, it is advisable to use distilled or demineralized water.
•
Do not use chemically descaled water or any other liquids for refilling.
FILLING THE TANK WITH WATER
•
Set the steam control knob (3) to “0” and the temperature control dial (1) to “OFF”.
•
Unplug the iron from the wall outlet, and wait for the iron to cool down.
•
Pour water into the water inlet (5):
•
-Fill up to the maximum level “MAX” of the water tank.
TEMPERATURE CONTROL SETTING
•
Always check the garment label for ironing instructions before ironing the garment.
•
If the ironing instructions are missing, then the table below may help you.
•
First you should sort the laundry: Wool with wool, Cotton with cotton etc. Start ironing the fabrics
requiring the lowest temperature and progress to the higher ones because the iron heats up quicker
than it cools down.
•
If the fabric consists of various kinds of fibers (e.g. cotton with polyester) you must always select the
ironing temperature for the material with the lowest advised temperature.
IRONING LABEL TEXTILE MATERIAL FABRICS
Synthetic Acrylic
Polypropylene
Polyurethane
Synthetic Acetate
Triacetate
Synthetic Polyamide (Nylon)
Polyester
Viscose(Rayon)
Silk Silk
Wool Wool
Cotton Cotton
Linen Linen
SETTING THE TEMPERATURE
•
Insert the plug in the wall socket and stand the iron upright.
•
Turn the temperature control dial (6) to the desired temperature setting.
•
The desired temperature has been reached when the pilot light has turned off. The pilot light will turn
on and off from time to time, indicating that the selected temperature is being maintained.