Contact Sytech Repair service centre.
o
Do not switch on the Electric plate without any container on top. This will damage the
appliance.
o
By ignoring the safety instructions, the manufacturer cannot be hold responsible for
any damage.
Parts of the SY-PE20
Pilot Light
165mm
130mm
Hot plate
Hot plate
Thermostat
Using the SY-PE20
Before first use:
•
Take the appliance and accessories out of the box. Remove the stickers, protective foil or plastic
from the appliance.
•
Clean the plate with a damp cloth.
•
Connect the power cable to the socket. (Note: make sure the voltage which is indicated on the
appliance matches the local voltage before connecting the appliance. 220-240V~50/60Hz
•
The heating plate is protected with a protective layer, which for the first use should be removed.
•
Switch the device and select the highest setting for 10 minutes. Some smoke might appear due
to the remaining of the plastic protector. Switch off the electric plate once 10 minutes have
passed. Now you can use the appliance.
•
Make sure there is no foreign object such as water ir food on the Electric plate before turning it
on.