channel.
-
To switch off the appliance, switch the on/off button to the off position.
Trimming eyebrows
-
Comb your eyebrows in the direction of hair growth.
-
Choose the short or long comb, depending on the desired hair length.
-
Place the eyebrow comb onto the trimming head.
-
Make sure that your eyebrow comb has been properly placed into the grooves on both
sides.
-
Move the comb over the eyebrow from outer tip of the eyebrow towards the base of the
nose (against direction of hair growth).
-
After use, make sure to switch off the unit.
Tip:
We advise you to start trimming with the long comb. If you think your eyebrows are still
too long after this, use the short comb
.
CLEANING & MAINTENANCE
-
Clean the appliance immediately after use and when lot of hair or dirt has been
accumulated on the cutting element.
-
Do not tap on the cutting element.
-
Do not use any sharp objects to clean the cutting element
-
Make sure the appliance is switched off.
-
Remove the battery from the battery compartment
-
Use the supplied brush to remove the remaining hair from the blade and from the combs.
-
The blade can be cleaned under hot running water as shown above (Fig1) and for a better
cleaning, remove the trimming head (2) by turning it clockwise.
-
Wipe the outer surface of the unit with a soft damp cloth, provided water does not get
inside the unit.
-
Do not use any chemicals or abrasive liquids to clean the unit.
-
Let all parts dry completely before you use the appliance again.
-
Insert the battery back into the battery compartment
SPECIFICATIONS
-
Nose, ear and eyebrow trimmer
-
Reciprocating movement to facilitate hair removal
-
Light weight and easy to use
-
Detachable head for easy cleaning
-
On and off switch
-
Blade material: Stainless steel
-
Water resistant: IPX4
-
Minimum and maximum length cut: 0 – 7mm.
-
Precision adjustment: 0mm, 4mm, 7mm.
-
Power: 1.2W
-
RPM: 5000 ±10%
-
Operates with 1 “AA” -R6 battery (Not included)
