Sytech SY-EX17 Скачать руководство пользователя страница 3

 

 

IMPORTANT 

 
Read this user manual carefully before you use the appliance and save it for future 
reference.  
 

Danger 

-

 

Do not immerse the motor unit in water nor rinse it under the tap.  

 

Warning 

-

 

Check if the voltage indicated on the bottom of the appliance corresponds to the 
local mains voltage before you connect the appliance.  

-

 

If the mains cord is damaged, you must have it replaced by Sytech Service 
Centre in order to avoid a hazard 

-

 

Do not use the appliance if the plug, the mains cord or any other parts are 
damaged.  

-

 

This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety. 

-

 

Children should be supervised to ensure that they do not play with the appliance.  

-

 

Always keep the SY-EX17 unplugged when not in use. 

 

Caution 

-

 

Always place the appliance on a flat, stable surface 

-

 

Do not use the citrus press longer than 1 minute without interruption 

-

 

This appliance is only meant for soft fruits, such as oranges or lemons. 

-

 

This appliance is intended for household use only. 

-

 

Never use any accessories or parts from other manufacturers or that Sytech 
doesn’t recommend. If you do use such parts that are not recommended by 
Sytech, the guarantee becomes void/invalid. 

 

Preparing for use 

 

1.

 

Clean all detachable parts before you use the appliance for the first time.  

2.

 

Make sure the appliance is assembled properly before you put the plug in the    
wall socket. 

3.

 

Remove the dust cover from the appliance. 

4.

 

Put the plug in the wall socket.  

 

USING THE SY-EX17 

 

1.

 

Open the storage compartment on the underside of the appliance and take out the 
juicer cone.  

2.

 

Attach the juice container to the drive shaft of the base unit.  

3.

 

Place the pulp sieve in the container 

4.

 

Fit the juicer cone on to the drive shaft  

5.

 

Push  the  spout  upwards  to  ensure  that  the  extracted  juice  remains  in  the 
container. 

6.

 

However, the juice may also be collected straight into a suitable container placed 

Отзывы: