PARTS
PARTS
PARTS
PARTS OF
OF
OF
OF THE
THE
THE
THE CONTROLLER
CONTROLLER
CONTROLLER
CONTROLLER
1) 2 Levels of heat to select from
2) LED indicator
OPERATION
OPERATION
OPERATION
OPERATION
-
Plug the socket into the mains
-
To turn the power on, move the sliding switch upwards so ‘1’ or ‘2’ shows in the
window. ‘1’ is low power (lower temperature), ‘2’ is high power (higher
temperature). The heated electric pad provides automatic electronic
temperature regulation and overheating protection. In the case of failure of the
automatic temperature controller, the pad will automatically permanently turn off
once the temperature reaches approximately 100 degrees Celsius.
-
Automatic temperature control: within about 10 minutes the temperature will rise
to 55-60 degrees Celsius. The temperature will then vary between 40-45 and
55-60 degrees Celsius as the pad regulates its own temperature.
-
To turn the pad off, move the slider down so ‘0’ shows in the window.
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
-
The heated electric pad should be checked regularly to ensure the control box
and the pad is intact. Use of the pad should be stopped immediately if any
wiring is exposed or the pad / control box is compromised.
-
The heated electric pad should be kept in a cool dry place. DO NOT EXPOSE
THE CONTROLLER, CABLES OR HEATING PAD TO WATER, MOISTURE
OR HIGH HUMIDITY
-
Sponge clean only with luke-warm water and neutral detergent. Rinse with
clean water by sponging and allow to air dry before re-use. WARNING: do not
allow the electric control to get wet while cleaning. Inner: polyester. Outer: polar
fleece.
Содержание SY-AL30
Страница 1: ......
