Programmed Playback:
CD:
UP to 20 tracks can be programmed to play in a certain order. Please follow the instructions as follows:
1. In STOP mode, press the PROG. (Program) button and“P-01 00”will appear on the display whilst the “00”will be
blinking.
2. Select the first specific track to be programmed by pressing the SKIP/SEARCH
or
buttons.
3. Press the PROG. Button once again to store the selected track into the memory.
4. Repeat steps 2 and 3 until all the specific tracks stored into the memory.
5. Press the PLAY/PAUSE
button to start playback.
6. When finished listening, press the STOP
■
button to stop .Press the STOP
■
button once again to turn it off.
CD MP3:
UP to 64 tracks can be programmed to play in a certain order. Please follow the instructions as follows:
1. In STOP mode, press the PROG. (Program) button and“P-01 01”will appear on the display whilst “01” will be
blinking. (01=the number of Album).
2. Select the album number of the first specific track to be programmed by pressing the SKIP/SEARCH
or
buttons then press the PROG. (Program) button.
3. Press the SKIP/SEARCH
or
buttons to select the number of the specific track.
4. Press the PROG. Button again to store the selected track into the memory.
5. Repeat the same procedures until all the specific tracks are stored into the memory.
6. Press the PLAY/PAUSE
button to start the playback.
7. When finished listening, press the STOP
■
button to stop. Press it again to erase the memory of the program.
Press it three times to power off the unit.
Line Out Jack
Connect the unit to the external audio source by means of a 3.5mm stereo audio cable (Cable not included). Press
the VOL (/-buttons to adjust the output level.
CD care
•
Treat the disc carefully. Handle the disc only by its edges.
•
Never allow your fingers to come in contact with the shiny,
unprinted side of the disc.
•
Do not attach adhesive tape, stickers, etc. To the compact disc label.
•
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive
cleaners to clean the disc. If necessary, use a CD cleaning Kit.
•
If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).When
cleaning the disc, wipe in straight lines from the center of the compact disc to the outer edge of the disc.
Never wipe in circular motions.
•
This unit is designed to play only compact discs bearing the identification logo as shown here. Other discs
may not conform to the CD standard and may not play properly. Compact Discs should be stored in their
cases after each use to avoid damage.
Содержание SY-933
Страница 1: ......