5. If you find the unit is not working properly, please contact Sytech Service Center. Under any
circumstances do not attempt to repair the unit by yourself as this may result in the risk of electro
locution and will void the warranty.
Using the radio
Operation guide
1. Open the battery compartment and insert 2 pcs of ‘UM1’- ‘R20’ 1.5V type batteries. Insert the batteries
according to their correct polarities as shown on the markings inside the battery compartment. If you do
not wish to use the radio with batteries, please use the AC cable power supply. Plug the accessory power
cord into the AC socket (8), and plug the AC power into a wall outlet
2. Turn the power/band knob to “ON” to begin using the unit
3. Select AM /FM band program to begin listening to the radio.
4. Rotate the volume knob (2) and select the desired volume level.
5. Rotate the tuning knob (3), observe the frequency indicator window and the pointer, and select the radio
program you wish to listen to.
6. When listening to the FM band radio, fully extend the antenna (5) and get the best reception by changing
the length and angle of the antenna.
7. Listening to the AM band is done using the internal magnetic antenna, which can be rotated to get the
best listening experience.
8. You may wish to use this unit with earphones. Connect the earphones into the earphone jack (1) (the
speaker inside the unit is automatically disconnected). You can now listen to the radio with your earphones.
9. When the radio reception becomes poor or the sounds is too low, please open the battery compartment
(9) and replace the batteries.
1. If you wish to turn off the unit, simply turn the power/band switch (2) to the “OFF” position. Always make
sure to unplug the AC power cord as well when not in use.
Note: During operation, the product may have radio interference which is caused by electromagnetic
waves such as y mobile phones, TV, Neon light, etc.. Use the radio keeping in mind there is enough
separation between the radio and the interfering appliances.
Specifications
• Frequency range: FM 88-108 MHz / AM 530- 1600 KHz
• SNR: 40 dB
• Speaker size:
Φ
66mm
• Earphone jack: 3.5mm output
• Earphone output power: 100mw
• Speaker output power: 0,5W
• Power supply: AC: 220/50Hz. DC-3V. 2 x batteries “R20”- “UM1”
• Dimensions:
180(W) x 98(H) x 47(D) mm
• Weight: 317g (Batteries excluded)