Music can also be played from a TF card. Simply insert the TF card into the slot on the radio clock. Make
sure you insert the TF card in the correct position. The unit can support TF cards up to 32GB capacity.
GETTING STARTED
The SY-X1040BT has 4 different modes. When the On button is pressed, the unit will enter Bluetooth
mode. To change the unit to the next mode, press the button.
The sequences of the different modes are as follow:
Bluetooth mode Radio mode Aux mode Clock mode.
To on the unit, simply press and hold the button. The display will turn on and the unit will be set to
Bluetooth mode.
Note: If the unit does not on after pressing 3 seconds on the button, then it probably needs
to be charged. Connect the AC adaptor and let the charging process begin.
BLUETOOTH
Once the icon icon flashes on the display, you can now connect and pair the SY-X1040BT to your external
Bluetooth device such as a mobile phone, tablet, MP4, etc…
On your device, turn on the Bluetooth function and start to search for SY-X1040BT. Connect to the device
once it has been found. The Clock radio will emit a sound confirming the unit and the external Bluetooth
device are now paired. The icon at this moment will be stop to flash and will remain on.
Note: There is not password for this unit, however if some device do require a password, please
enter “0000”
If no buttons are pressed during 5 minutes while the unit is on Bluetooth mode, the unit will
automatically return to clock mode.
CLOCK AND ALARM SETTING
Press the Power On button and then press key to switch to the clock mode. A sound
will be heard indicating the change of mode.
Press and hold the key to adjust the clock, the hour digits will start to flash. Adjust the hour using the
or k keys. Press and hold the key to adjust the minute and repeat the same process.
Once done, press the to finalize, or it will automatically end the settings in 10 seconds if no buttons
are pressed.
To activate the alarm, short press the key. When the icon appears on the display, it means
the alarm is set and activated. Press the same button to deactivate the alarm.
To adjust the alarm, press and hold the key until the hour digits start to flash. Adjust the alarm
time by using the keys. Hold and press the key to adjust the minutes. Use the same
buttons to adjust the minutes. Finally press the
to confirm the settings or wait for 10 seconds
for it to automatically set.
Содержание SY-1040
Страница 1: ......