D017-0025-301-01 IM500-SM500 Installation Guide
© 2020 Systems With Intelligence. All rights reserved.
www.SystemsWithIntelligence.com
support SystemsWithIntelligence.com
10
6.3
Step 3: Mounting the arm
The mounting arm is shown in Figure 6-3 or Figure 6-5 and contains three parts: Mounting
base (1), Arm (2) and Camera cradle (3).
Figure 6-3 Arm, base and cradle
Instructions:
1.
Disassemble the arm by turning the butterfly nut (4) and separate the mounting base (1)
and the camera cradle (3).
2.
Mount the base (1) - you must mount this plate on the wall or pole. See dimensions in
Figure 6-4 or Figure 6-6.
3.
Mount the camera cradle (3) on the back of the IM500/SM500 using the camera
mounting screw (5). Do not assemble the arm, proceed to the next section.
Figure 6-4 Mounting base dimensions