1) To router, switch
or powerline
2) To speakers (left and right)
3) To power supply
NetConnect pack contents
1 x NetConnect amp
2 x IMO speaker connectors
1 x Power supply
1 x Mains cable
1 x Quick start instructions
Description
This quick start guide is for a system using NetConnects only. If you are using an S7
NetServer all NetConnects should be set to
slave
mode.
Step 1
Make connections in order shown below.
During setup only one NetConnect should be connected to the network.
Step 2
Open a web browser and type
//netconnect
into the address bar to open quick setup.
Step 3
Set NetConnect mode to
master
using drop down box.
Only one NetConnect in your system should be set to master mode. Set the rest to
slave
mode.
Step 4
Enter your
Zone Name
into the box (Kitchen, Dining etc).
