SystemBase Portbase-3010, Руководство пользователя

Страница: 49 / 118

Portbase User Guide
Socket number for awaiting connections can be set in ‘Socket Number’ field.
Once a UDP packet is received to the socket that waits for the connection, the data is
transmitted to the serial port. The data input from the serial port is put into UDP packets,
which eventually are sent to the client.
J udp_client
When the data is input to the serial port, UDP packets are sent using the preset IP
address and the socket number of the server.
J xconsole
X-Console is a console management server provided by SystemBase.
This mode is used when X-Console is linked to Portbase for better management and
performance. This protocol only works with the X-Console software. All data is encrypted
by the SEED method during communication. For more information, visit the company
website, http://www.sysbas.com/ and refer to the X-Console page under Products section.
J ppps (Only in PB-3010M)
Use the port as a modem port for PPP server
J Modem (Only in PB-3010M)
Use the port as a modem port for console login.
J Modem (Only in PB-3010M)
Use the port as a modem port for PPP client
set “port <x/ all/ x-x> keepalive <0 ~ 32767>”
Determine if disconnection and reconnection is required when no communication takes place
after the socket connection between the given serial port and the server.
If the value is set to 0, this function is disabled. Scales are in seconds.
(Only applies to tcp_server, tcp_client, and tcp_mserver operation modes)
set “port <x/ all/ x-x> buffering <0 ~ 32767>”
This option needs to be set when consecutive data from the given serial port needs to be
transmitted to socket at once.
If 100 bytes of character string is to be transmitted from the serial device and the buffering value
is set to ‘10’, Portbase waits upto 10 msec for each byte-to-byte interval until the entire 100 bytes
49