SystemAir Topvex SF02-S12, Эксплуатация и обслуживание

Страница: 26 / 28

22 | Service
6.1 Alarms
The alarm button (pos.1, figure 2) opens the alarm queue. When pressing this button active and non-acknowledged
alarms will be displayed in the menu window. The alarm-LED (pos.2, figure 2) is flashing if there are non-acknowledged
alarms and steady if the alarms are still active but have been acknowledged.
If there are multiple alarms, use UP/DOWN to move between them. An alarm can be acknowledged or blocked by using
OK and UP/DOWN. To abort and go back to start menu press cancel and then press LEFT.
7 Service
Before calling your service representative, make a note of the specification and production number from the data plate
on the unit.
230/400V 25 A 50Hz
Systemair Sverige AB
Industrivägen 3
SE-73930 Skinnskatteberg
Sweden
4016 W IP23 225kg
Ver. A
Serial. no: 1234/567891-0001/140214
Topvex XXXX
16kW 16kW
www.systemair.com
2 3 4
5
1. Item number
2. Production order number
3. Consecutive number
4. Production date
5. Product code (product
specification)
130323 | A002