SystemAir SYSCROLL AIR CO/HP 40-75, Руководство по установке и обслуживанию

Страница: 26 / 64

24
6 - SyScroll Air CO/HP Control
ICON / COLOR
LED N°*
STEADY ICON
DESCRIPTION
BLINKING ICON
ICON
- Alarm ON
First capacity step
Second capacity step
Primary circuit pump
Source circuit pump
Electrical heater
Sanitary hot water valve / pump
Boiler
/ RED
1
2
3
4
5
6
7
/ GREEN
/ GREEN
/ GREEN
/ GREEN
/ GREEN
/ RED
/ RED
/ RED
/ RED
/ RED
- Mode: HEATING
- Current HR
- Time slots activ.
- Mode: COOLING
/
/
/
- Mode: STAND-BY
- Configurable
Not used
Menu surf
- Alarm QUIT
- AntHeat pump ON
- Heating mode by remote
- HR setting
- Time slots programming
- Cooling mode by remote
/
/
/
- Stand-by mode by remote
- Configurable
Not used
/
6.3 Folder structure
Folder structure is composed of totally four menus
1) Main display
¤
used to set what to display without acting on any
key
– Ai
¤
analogue input (temperature, pressure)
– rtC ¤ room time clock
– SetP ¤ standard set-point
– SetR
¤
corrected set-point (according to climatic correction,
etc.)
2) Operating mode
¤
used to set operating mode
– StbY ¤ stand-by
– HEAT ¤ heating
– COOL ¤ cooling
– AS
¤
sanitary hot water
3) Status
¤
used to show resources values
– Ai (AIL/AIE/Air)
¤
analogue inputs (main board / expansion
board / remote terminal)
– di (diL/diE) ¤ digital inputs (main board / expansion board)
– AO (AOL/AOE)
¤
analogue outputs (main board/expansion
board)
– CL (HOUr/dAtE/YEAr)
¤
clock
– AL (Er00 ¤ Er98) ¤ alarms
– SP ¤ standard set-point
– Sr
¤
corrected set-point (according to climatic correction,
etc.)
4) Program
¤
define parameters, functions, password and to display
alarm log
6.4 Menu structure
“Program” menu is composed of totally four folders
1) Parameters
¤
change unit parameters
2) Functions
¤
manual operations (switch ON / switch OFF, alarm
quit, historic alarm delete, multi function key use)
3) Password ¤ define visibility levels for parameters/folders
4) Alarm log ¤ display alarm log
Parameter folder gives access to following sub-folders
– CL/CE/Cr/CF
¤
configure device I/O (L
¤
local; E
¤
expansion; r
¤
remote; F
¤
serial)
‡ DQDORJXH LQSXWV W\SH RI SUREH UDQJH GLIIHUHQWLDO ORJLF
function)
‡ GLJLWDOLQSXWVORJLFIXQFWLRQ
‡ GLJLWDORXWSXWVORJLFIXQFWLRQ
‡ DQDORJXHRXWSXWVUDQJH
‡ VHULDOFRQILJXUDWLRQFRPPXQLFDWLRQSDUDPHWHUV
– TR ¤ define thermoregulation parameters
‡ VHWSRLQWPD[PLQK\VWHUHVLV
‡ W\SHSURSRUWLRQDOGLIIHUHQWLDO
‡ SUREHVHOHFWLRQ
– ST
¤
define operating status
‡ FRROLQJRQO\
‡ KHDWLQJRQO\
‡ VFRROLQJDQGKHDWLQJ
‡ FKDQJHRYHU
– CP
¤
configure compressor parameters (type/number/timing)
– PI ¤ define primary circuit / parameters / functions
‡ RSHUDWLQJPRGHGLVDEOHDOZD\V2121LIFRPSUHVVRU21
‡ GLJLWDODQDORJXHFRQWURO
‡ DQWLVWLFNLQJ
‡ DQWLIUHH]H
– BR ¤ control the parameters for an additional step for heating
and for sanitary hot water integration (boiler)
‡ RSHUDWLQJPRGHGLVDEOHGLIIHUHQWLDO
¤
fixed or in function of
outdoor air temperature)
‡ VHWSRLQWK\VWHUHVLV
– DS ¤ define set-point offset (dynamic set-point) depending on
‡ DQDORJXHLQSXW«9«9«9«P$
‡ RXWGRRUDLUWHPSHUDWXUH
‡ URRPWHPSHUDWXUH
– AD
¤
simulate an electronic inertial accumulator, acting on set-
point and hysteresis (adaptive function), by confronting minimum
/ effective ON-OFF time
– AS ¤ define sanitary hot water management parameters
‡ RSHUDWLQJPRGHGLVDEOHVDQLWDU\KRWZDWHUYDOYHUHVLVWDQFH
/ pump)
‡ VHWSRLQWK\VWHUHVLV
‡ DQWLOHJLRQHOODIXQFWLRQ
– HP ¤ define heat pump block management parameters
‡ RXWGRRUDLUWHPSHUDWXUH
‡ WKHUPRUHJXODWLRQWHPSHUDWXUH
‡ GLJLWDOLQSXW
– PL ¤ define capacity limitation to protect the unit (high/low T,
high/low P)
– TE
¤
define time slots management (different operating daily
profiles)
– AL
¤
define alarms management (automatic / manual reset, by-
pass time, sampling)