06
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
SHORTCUT
CLEAN
LED
Turbo
SLEEP
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT
FAN
FAN SPEED
SWING
Model:
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
RG10B(E2)/BGEF(Fresh feature is not available)
RG10B10(E2)/BGEF & RG10B10(E2)/BGCEF(20-28 C/68-82 F)
RG10B2(E2)/BGCEF, RG10B10(E2)/BGCEF(Cooling only model,
AUTO mode and HEAT mode are not available )
Used to confirm the selected
functions
Decreases temperature
O
O
in 1 C(1 F) increments.
Min. temperature is
O
O
O
O
16 C(60 F).
Set timer to turn unit on or off.
Saves energy during sleeping
hours.
Scrolls through operation
functions as follows:
Fresh( ) Follow Me( )
AP mode( ) Fresh ....
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
NOTE: Holding this button
down for 2 seconds will activate
Silence feature.
Enables unit to reach preset
temperature in shortest
possible time
Used to restore the current
settings or resume previous
settings.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some units).
NOTE:
HEAT mode is not
supported by the cooling only
appliance.
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).
