SystemAir MRH 1000, Инструкция по установке и эксплуатации

Страница: 17 / 24

Uninstalling/dismounting
MRH 06.04.2017 17
11 Uninstalling/dismounting
DANGER
Hazard from crushing/shearing by the hatch cover!
The hatch cover can be stopped in any position by turning the actuator`s service switch to middle (0) posi-
tion.
WARNING
Hazard from electrical voltage!

Disconnection and uninstalling only by a trained electrician or trained and instructed qualified person-
nel!

Observe 5 safety rules for the electrical expert!
-
disconnect from the power supply (all-pole),
-
prevent switching on again,
-
test absence of voltage,
-
earthing and short-circuiting,
-
protect adjacent live parts by covers and barriers and fit a suitable warning notice.
CAUTION
Danger from cutting edges and impact!

Wear protective gloves when dismounting!

Dismount carefully.
WARNING
Hazard from falling parts!

When selecting the hoisting device observe the weight (weight information on the name plate).
Carefully disconnect all wires.
Remove the fan from duct. Carefully remove the fastening material.
Lift the MRH with an appropriate hoisting device on the provided lifting eyes. Place the MRH on appropriate
pallet.
12 Disposal
12.1 Disposal of the fan
Should the fan be disposed, proceed as follows:
Disassemble the fan into its components.
Separate the parts according to
-
reusable material
-
material groups to be disposed (metal, plastics, electrical parts, etc.)
Provide for the recycling of material. Consider the national regulation.
12.2 Disposal of packaging
Provide for the recycling of material. Consider the national regulation.