SystemAir menerga TX, Инструкция по сборке

Страница: 30 / 52

4.2 Connecting the air duct system
Personnel: n Technicians for sanitary, heating and
air conditioning engineering systems
Protective equip-
ment:
n Safety shoes
n Safety gloves
n Ear protection
n Protective goggles
n Occupational safety clothing (Personal
Protection Equipment - PPE)
On the device, there are factory-assembled options for duct con-
nections, either for a direct connection or a flexible duct connec-
tion.
The positions of the duct connections on the device can be taken
from the device drawing.
The unit drawing is fixed to the outside of the transport section
of the unit and can also be found in the operating manual; see
example
Ä
Chapter 2.1.1 ‘Type of packaging’ on page 13 .
The duct connection supports on the device are marked with the
following stickers.
The sticker (Fig. 11) marks the connection for the return / extract
duct.
The sticker (Fig. 12) marks the connection for the outside / fresh air
duct.
The sticker (Fig. 13) marks the connection for the exhaust air duct.
Fig. 11: Return / extract duct
Fig. 12: Outside / fresh air duct
Fig. 13: Exhaust air duct
Connecting the air duct system
25.08.2022 Device type: Menerga TX - ThermoCond 30