SystemAir Fantech FSD Series, Инструкция по установке и эксплуатации

Страница: 3 / 8

3
V
MOUNTING ILLUSTRATION 2
MOUNTING ILLUSTRATION 3
Suspended from
structure with
threaded rod
Vibration Isolator
Fantech FSD
Series Fan
Flexible Connections
Support Structure
Flexible Connections
Vibration Isolator
Fantech FSD
Series Fan
Fantech FSD
Series Fan
Flexible
Connections Vibration Isolator
Air
Flow
Air
Flow
Air
Flow
MOUNTING ILLUSTRATION 1
Please follow all applicable codes when installing this unit
1. Determine the fan location and preferred mounting method.
2. Install included mounting brackets onto fan.
3. Place fan in position.
4. When fan is in position, support fan with the temporary fixture.
5. If possible, use vibration isolation mounts (not included) to connect fan
to support structure.
6. Once fan is secure, remove temporary fixture.
7. If possible, use flexible connectors (not included) to make duct
connections.
8. Using the appropriate diagram on the next page, make electrical
connections
When mounting fan, use all four included
brackets and plug any unused holes.
Please follow all applicable codes when installing this unit
1. Determine the fan location and preferred mounting method.
2. Install included mounting brackets onto fan.
3. Place fan in position.
4. When fan is in position, support fan with the temporary fixture.
5. If possible, use vibration isolation mounts (not included) to connect fan
to support structure.
6. Once fan is secure, remove temporary fixture.
7. If possible, use flexible connectors (not included) to make duct
connections.
8. Using the appropriate diagram on the next page, make electrical
connections
When mounting fan, use all four included
brackets and plug any unused holes.
Please follow all applicable codes when installing this unit
1. Determine the fan location and preferred mounting method.
2. Install included mounting brackets onto fan.
3. Place fan in position.
4. When fan is in position, support fan with the temporary fixture.
5. If possible, use vibration isolation mounts (not included) to connect fan
to support structure.
6. Once fan is secure, remove temporary fixture.
7. If possible, use flexible connectors (not included) to make duct
connections.
8. Using the appropriate diagram on the next page, make electrical
connections
When mounting fan, use all four included
brackets and plug any unused holes.