SystemAir EX 140A, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 20

EU Declaration of conformity |
1
1 EU Declaration of conformity
Manufacturer
Systemair Sverige AB
Industrivägen 3
SE-739 30 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
The manufacturer hereby declares that the following products:
Centrifugal fans EX 140A/180A
EU-type Examination Certificate (ATEX) Presafe 16 ATEX 8598 X DNV GL Nemko Presafe AS (2460)
Quality Assurance Notification (ATEX) Presafe 16 ATEX 8871Q DNV GL Nemko Presafe AS (2460)
(The declaration applies only to a product in the condition that it was delivered in and that was installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are added or ac-
tions carried out subsequently on the product).
Comply with all applicable requirements in the following directives:
• ATEX Directive 2014/34/EU
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
The following harmonized standards are applied in applicable parts:
EN 60 079-0:2012/A11:2013 Explosive atmospheres — Part 0: Equipment - General requirements.
EN 60 079-1:2014
Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures
"d"
EN 60 079-7:2015
Explosive atmospheres — Part 7: Equipment protection by increased safety ''e''.
EN 14986:2017
Explosive atmospheres — Design of fans working in potentially explosive
atmospheres.
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk
reduction.
EN ISO 13857
Safety of machinery - Safety distances to prevent hazard zones being reached
by upper and lower limbs.
EN 61000-6-2
Electromagnetic compatibility (EMC) – part 6-2: Generic standards - Immunity for
industrial environments.
EN 61000-6-3
Electromagnetic compatibility (EMC) – part 6-3: Generic standards - emission
standard for residential, commercial and light-industrial environments.
Skinnskattberg 09–04–2018
Mats Sándor
Technical Director
135371 | A007