background image

499231

Warranty    |         5

2.2   Personal protective equipment

• All personnel working with the fan must abide by the USA Code of Federal Regulations, Title 29: Labor, Part 1910—OCCUPATIONAL 

SAFETY AND HEALTH STANDARDS - Subpart I—Personal Protective Equipment

2.3   5 rules of electrical safety

 

All personnel interacting with the fan should be aware of electrical safety and practice the following rules:

 

• Disconnect live components

 

• Prevent reactivation

 

• Test absence of voltage

 

• Ground and short-circuit

 

• Cover or restrict adjacent live parts

3    Warranty

For the assertion of warranty claims, the products must be correctly connected and operated and used in accordance with the data-

sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning report. Systemair will require these 

in the case of a warranty claim. The commissioning report is a component at the end of this manual. The maintenance plan must be 

implemented by the installer or building operations team. See section 11.3 Maintenance for the maintenance plan.

4    Delivery, Transport, Storage

4.1    Safety information

• Prevent access by unauthorized persons via  

 

• Wear protective equipment during all work in the vicinity of    

   

  safety personnel or access protection. 

 

 

  the fan, see 2.2 Personal protective equipment

       

• Do not walk under suspended loads.

2.1   Personnel

The fan may only be used by qualified, instructed, and trained personnel. The persons must know the relevant safety directives in order 

to recognize and avoid risks. The individual activities and qualifications can be found in Table 1: Qualifications.

Table 1 Qualifications

Activities

Qualifications

Storage, operation, transport, cleaning, disposal

Trained personnel

Electrical connection, commissioning, electrical disconnection  Licensed Electrician 
Installation, disassembly

Licensed Riggers or a Certified Contractor

Maintenance

Licensed Electrician | Licensed contractor or matching qualification

Repair

Licensed Electrician | Licensed contractor or matching qualification

Note:

The operator is responsible for ensuring that personnel are instructed and understand the contents of the operating  

instructions. If something is unclear, please contact Systemair or its representative.

i

Warning

Wear appropriatre protective equipment during all work in the 

vicinity of the fan, as dictated by local and national code.

Warning

Risk from rotating fan blades

Warning

Suspended loads

Содержание AJR 355





















Отзывы: