System76 Serval WS, Руководство по обслуживанию

Страница: 22 / 35

Replacing an M.2/NVMe SSD
M.2 SSDs offer, at minimum, SATA3 speeds and performance in a package about the
size of a stick of gum. NVMe M.2 SSDs offer even higher performance. The Serval WS
supports two M.2 SSDs, size 2280, either M.2 SATA or NVMe M.2 PCIe Generation 4.
Tools required: ​Cross-head (Phillips) screwdriver
Time estimate: ​5 minutes
Difficulty: ​Medium
Steps to replace the M.2 drive
1. Follow the steps above to remove the cover.
2. Locate the M.2 drive (or drive slot).
3. Unscrew the retainer screw opposite the M.2 slot.
4. Remove the existing M.2 drive by sliding it sideways off the contact pins and then
lifting it out of the slot.
5. Insert the new M.2 drive into the slot, connect the contact pins, and hold it in
place.
6. Replace the retainer screw.
System76 Serval WS (serw11) Service Manual
21