CAREU UCAN 3G - User Guide
18
Chapter 3
The main page of the Intelli FleetWeb appears as below:
3.6 Firmware Upgrade
The firmware of the CAREU UCAN 3G can only be updated through USB
interface. With the firmware loader tool provided by S&T, firmware update can be
done for the device. Such firmware loader runs on Windows-based systems. To
upgrade the firmware, follow the procedure below
1. Connect the device to your PC with the USB cable.
2. Connect the device to power.
3. Power on the device.
4. Run ServerUSeries.exe. A window displays as follows:
5. Press browse the button
to browse to the firmware provided by S&T.
6. Press the
Start
button to run the firmware program.
7. After the writing progresses to 100%, it takes about 20 seconds for the update
to completes.
8. Firmware update completes.
