System air 316293, Руководство по установке

Страница: 4 / 12

3
3. ATTACHED FITTINGS
Please check whether the following fittings are of full scope.
If there are some spare fittings , please restore them carefully.
Never throw or beat the controller.
Before installation, operate the remote controller
to determine its location in a reception range.
Do not install the remote controller in a place
exposed to direct sunlight or close to a heating
source, such as a stove.
Note that the positive and negative poles are
right positions when loading batteries.
CAUTION
4. INDOOR UNIT INSTALLATION
NOTE
This manual is subject to changes due to technological
improvement without further notices.
■
Version I
Vertical unit with casing,with air intake from front and air
outlet on top, for installation on a wall or on feet on the
floor.
Fig.4-2
Fig.4-1
a
a
Receive signal
1
1
4
Name of Accessories
Installation manual
Qty
2
(This manual)
Usage Outline
Pipe insulation material
Signal receiver
display board
Mounting screw
(ST3.9x12-C-H)
Heat insulation
1
1
Copper nut
Support
1
Cable group
Use for pipe con-
nection of engin-
eering installation
Use for installation
of display board
4.1 The units may be mounted vertically,
provided that the correct clearances for
positioning are maintained. (Refer to Fig.
4-1~Fig.4-5)
Capacity
(kW)
2.2 ~ 2.8
3.6 ~ 4.5
5.6 ~ 8.0
A(mm) B(mm)
1200
1500
1000 225
225
225
C(mm)
596
596
596
Table.4-1
B
A
C