Systech Corporation RCS/3000, Руководство по оборудованию

Страница: 17 / 32

Installing the Hardware 11
DB-9 Pin
Number
DB-25 Pin
Number/Signal
1 DCD
9 RI
8 CTS
7 RTS
6 DSR
5 GND
4 DTR
3 TX
2 RX
8 DCD
22 RI
4 RTS
5 CTS
20 DTR
7 GND
6 DSR
3 RX
2 TX
Table 3-5 DB-9 to DB-25 3-wire Terminal Cable
Ethernet LAN
The RCS/3000 is connected to your LAN using an ethernet port. There is an ethernet port on
the front panel labeled LAN. The LAN port is hardwired as an ethernet peripheral RJ-45 port
so that it can conveniently be connected to a HUB using a standard straight through patch
cable. The LAN port is typically used to connect the RCS/3000 to the local ethernet network.
There may be a second, optional, ethernet port on the front panel labeled HUB. The HUB
port is a standard ethernet HUB port. Any 10BaseT ethernet device can be connected to the
HUB port using a standard straight through patch cable. The HUB port is typically used to
connect other devices to the ethernet network.