699-41-20.1
-
39 -
DuoLine 80
2x1,4 cm3
DuoLine 160
2x2,8 cm3
* Grease in two stages. After the first stage, drive the guide slides through
three slide lengths and then top up with the second stage.
Recommended lubricating interval taking the environmental factors and
loading data specified in these assembly instructions into consideration.
6.8.5.2
Lubrication points
Version
View on the lubrication points
Tooth belt (Z)/without drive (K)
Spindle (S)
DuoLine Z/R/S 50x50
DuoLine Z/R/S 80x80
DuoLine Z/R/S
120x80
DuoLine
Z/R/S
120x80-II
DuoLine Z/S 80
DuoLine Z/S 160
Fig. 31 View of the lubrication points for different axis types:
- for the section slide (4) and
- for the spindle (5).
Lubrication of spindle For lubricating the spindle see Chap. 6.7.10.2.
6.9
Maintenance of axes with bush bearings
6.9.1
Linear axis ZLW
Linear glide polymer slide-bearings are deployed on the guides for the
cogged belt axis ZLW. These bearings are 100% maintenance and lubri-
cation free. The omission of lubrication results in a low level of dirt sen-
sitivity, since dirt particles cannot become attached to the moving parts.
The polymer slide-bearings can be replaced.
6.10
Maintenance of rotary modules
6.10.1
Rotary modules with worm gears
The worm gear of the rotary modules is maintenance-free by a lifetime
lubrication under normal operating conditions.
