7
5.2 Installation Steps
(Fig. 1)
Loosen the tire: fix both sides of the tire, press
and make it bulge.
(Fig. 2)
Remove the tire: the valve faces the mounting
arm in the one o’clock direction when removing
the tire.
(Fig. 3)
Install the sensor and valve: insert the valve
through the rim hole, fix the screw to secure the
valve and sensor by 2 Nm in torque, attach the
sensor body to the inner surface of the rim by
adjusting the angle of the sensor body.
(Fig. 4)
Install valve to the rim hole: guide the washer
into the valve, and fix the nut by 4 Nm in torque,
then tighten the cap.
(Fig. 5)
Mount the tire: grip the rim edge and the valve is
opposite to the mounting arm, avoid hitting the
sensor during arm operation.
After installation, please download the APP to
your smart phone, and proceed with all settings.
