Digital Creasing Machine
- 6 -
Chapter 3 Initial Installation
After opening the machine package, the hardware installation is very simple, and fixes the paper
collecting cardboard and the extended input cardboard directly by 3 screws, as shown in the figure.
After the delivery tray is fixed, place each paperboard on the delivery tray.
Extended
input
cardboard
Paper collecting
cardboard
Tool Installation:
Install the knife according to the label on the blade gate
Open the blade gate, pull out the knife set (knife and cutting stick) and put it
aside for the moment.
Pull out the other knife set from the right side of the machine and insert it into
the blade gate according to the label on the blade gate.
Insert the original knife set into the right side of the machine.
Creasing – upper tool: cutting stick; lower tool: creasing knife
Perforating – upper tool: cutting stick; lower tool: perforating knife
*Do not mix up the cutting stick.
