3)
One Channel Receiver
Model : 700㎒ / 900㎒ Band (RX-700D/900D)
A. Font Panel
① RF Signal level Meter
It indicates the sensitivity of RF signal
The better the RF signal is, the more green segments are
lighting up.
② Squelch Lamp
When the signal of transmitter is flowed in, this Lamp lights up
③ True Diversity Lamp
True Diversity means there are two RF tuners incorporated and it
has automatical function to choose a tuner in better receiving
condition.
④ Audio Level Meter
If the signal of transmitter is flowed in, this LED begins to light
up.
⑤ Channel Indicator
It shows the current channel
There is a channel switch on the rear panel
⑥ AF Output volume
⑦ Headphone Jack
It is very convenient to monitor sound before going into the
speakers.
⑧ Monitor Gain
It adjust the output level of headphone
⑨ Power switch
1) If Power of transmitter start to work, RF lever meter of receiver
simultaneously lights up. By the way, if the RF lever meter is
not going up to meddle, there are something bad happened
probably. And in case of illegible, it is caused by the antennas
of receiver or longer operating distance than 100m. Please refer
to the troubleshooting sheet.
2) If the MIC start to work well it is desirable to make the tour of
intended-area in order to confirm whether there are dead points
or not. Because the lowering of RF can lead to the
troubleshooting such as Fizzing. For your information, it is one
of solutions to relocate the receiver a little.
①
② ③
④
⑤
⑥ ⑦ ⑧
⑨
- 16 -
- 7 -
