5
•
Gamma Switch (on/off)
– The gamma correction switch allows .45
correction for non-linearity gain response in the monitor when set to
ON.
When set to OFF, there is no gamma correction.
•
AGC Switch (off/on)
– The auto gain control switch allows the video
signals to maintain a constant level. This switch is useful when using
the camera at low-light levels and when lighting levels change over
time. For best low light conditions, this switch should set to ON.
•
AWB1, AWB2 Switch (on/off)
– This camera have four white balance
setting
ATW (auto tracing white balance)
– The camera automatically aim
to maintain white objects as white even if the light color changes.
AWB (auto white balance)
– Quick ATW.
Indoor
– improves the color balance in areas where a mixture of light
sources exist.
Outdoor
– Improves the color balance in arrears where day light is
the main source of light.
Switch Position
SW8
SW9
Mode
Switch
SW8 9
on
on
ATW
on
off
AWB
off
on
Indoor
off
off
Outdoor
8. Power Input Terminal
– This terminal accepts a 12V DC power source
from a 12V DC +/- 20% using a UL-listed Class 2 power supply only.
9. Video Out BNC Connector
– This BNC connector provides a 1.0 Vp-
p/75 Ohms composite video signal.
