Syrincs I12W, Руководство пользователя

Страница: 10 / 16

We recommend you to set up the speakers in a way, that their sound signals
can reach the audience unobstructedly. It will often be helpful to mount the
speakers on tripods. Thus, the sound will be evenly spread with maximum
range throughout the audience area.
Always use high grade cables to connect your equipment. Otherwise you won't
reach maximum sound quality.
For optimum results both impedance and power rating of the speaker must
match the requirements of the amplifier / input signal. Consider the technical
specifications of the speakers connected. The overall impedance of the con-
nected loudspeakers shall not be less than the minimum output impedance of
the amp. The amps max. RMS output power should be 50 % above the power
handling capacity of the connected speakers.
If you notice distortion during operation, either the amp or the speaker is over-
loaded. This may permanently damage the amp or the speaker. Always reduce
the volume as soon as you notice distortion.
Installation
10 / 16 User manual I12W, I22W (Issue 1)