Synway TEJ-1A/PCI, Руководство по оборудованию, Страница: 12 / 14

Synway Information Engineering Co., Ltd
Receive
End
disconnected disconnected short-circuited short-circuited
Transmit
End
short-circuited short-circuited short-circuited
PC not
grounded
Receive
End
short-circuited disconnected
manage to
make the PC
grounded
short-circuited
Table 2-2 Configuration of Grounding Jumpers for Use of 75 Ω E1 Unbalanced Coaxial Cable
Step 2: Properly fit the board onto the PC chassis.
It is suggested to fix the L-brackets on the board with screws before going to the next step.
Step 3: Connect to digital trunks.
Each board provides 1~4 RJ48C jacks, each of which can either connect directly with digital trunks
or convert to 2 BNC connectors via an RJ48C-to-BNC adapter. See Figure 2-6 below.
Figure 2-6 RJ48C-to-BNC Adapter
Step4: Set up an application environment.
Connect digital trunks with the on-board RJ48C jacks to establish an application environment.
Step5: Boot your computer and install the driver.
Regarding driver installation, refer to the file ‘SynAST UserManual.doc’ for details.
Synway TEJ Series Hardware Manual （ Version 1.0 ） Page 8