Syntrox Wasilla FW-100W, Инструкция по эксплуатации

Страница: 6 / 8


Switch on the unit by using the switch on the remote

To switch on the massage function, move the MASSAGE button to “HI” or “LO”,
as indicated on the remote.

To switch off the massage function, move the MASSAGE button to the “OFF”
position.

To switch on the heat function, move the HEAT button to “HI or LO”, as
indicated on the remote.

To switch off the heat function, move the HEAT button to the “OFF” position.
Maintenance and cleaning

This unit is maintenance free.

If a fault does occur, ensure that the mains power adapter is properly
connected.

If the unit becomes faulty, do not try to repair it yourself.

This appliance is for household use only and is not user-serviceable

Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning.

Do not use bleach or other abrasive substance or solvents to clean your foot
warmer as it can be damaging to the finish.

The electric foot warmer should be kept clean, because it may not be washed
or dry-cleaned.

Before cleaning the foot warmer, always disconnect the plug from the mains
and allow it to cool down.

The foot warmer can be cleaned with a dry, soft brush.

Small marks can be removed with a cloth or a slightly damp sponge, using a
mild liquid cleaner.

The foot warmer may not become wet, if it becomes damp it must be air dried.

Store the foot warmer in a dry place and do not place any objects on top of it.
Cleaning the fleece liner

Before cleaning the foot warmer, the liner must be taken out.

The liner can be cleaned with a damp cloth or according to the care instructions
on the labels.

Use solvent-free cleaners only.

Only use the foot warmer again, once the liner is completely dry.
TECHNICAL DATA
Power : 100W
3 temperature settings overheat protection, automatic switch off after 90 min.
Protection class: II