2
Caution
：
1. To reduce the risk of fire, replace only with same type fuse.
2. Free standing installation only.
3. Do not use extension cords.
Warning:
1.
If the supply cord is damaged, it must be replaced by a qualified person in order to avoid hazard.
2.
Please screw off the door before throwing it away.
3.
Please keep the appliance away from any flammable substances.
4.
To avoid a hazard due to the instability of the appliance, it must be fixed according to the instructions.
5.
Do not use electrical appliances inside the food storage compartments of the appliance.
6.
This appliance is not intended for use by persons (including children) with reduced physical,
7.
Children should be supervised to ensure that they do not play with the appliance.
8.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
.
9.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
OPERATION OF REFRIGERATOR
.
Clean the inside before use.
z
Fix the shelves properly according to the instruction.
z
When first time use (or haven’t used it for a long time), you should adjust the temperature to minimum and have the
cabinet empty running for 2 hours, and then put your wine in it and adjust the desired temperature.
z
When the power is connected, cooling system starts to work. The TEMP-ADJ button is set on certain position, which
means that if the temperature in the wine cooler reaches the point set, Self-control Temperature System stops
cooling system so the temperature in the cabinet rises gradually.
z
When the inside temperature rises above the set point, Cooling Self-control Temperature starts to work again, the
cellar enter into cooling circles.
z
When you want to change the temperature in the cabinet, You can push “Temp +” and“ Temp –” to increase and
decrease the temperature.
z
You can push the “C/F” button to switch between Celsius and Fahrenheit or push the “Lamp” button to control the
light inside.
NOTE:
After you have set the temperature, the LED display will return to show the temperature in the cooler, but it could turn to
the point that you have set gradually.
PARTICULAR PRECAUTIONS
z
Please unplug the wine cellar before moving.
z
If there is a long distance to move, please use a cart for delivery
z
Please check if all the parts are ready before installation.
z
In order to function at its potential, this wine cooler needs to be placed on flat floor, with 5cm spaces at each side
and 10 cm at the backside.
z
The height of the wine cooler is adjustable by adjusting the four legs, but cannot be over 20 mm of each.
z
Keep ventilation holes clear, and keep at a distance of 50 mm from surroundings.
z
Please keep away from the heat resources or gas.
z
Avoid direct sunshine and carry high temperature.
z
Do not place heavy articles on the top of the cellar.
