9
Code 128
UPCE
UPCE with ADDON 2
UPCE with ADDON 5
EAN8
EAN8 with ADDON 2
EAN8 with ADDON 5
EAN13
EAN13 with ADDON 2
EAN13 with ADDON 5
Other barcodes must be enabled through programming.
2.
Buzzer
To test the buzzer with different Frequency/Duration. Press
ENTER
key to start and then
press any key to stop the test.
3.
LCD & LED
To test LCD display and LED indicator. Press
ENTER
key to start and then press any key
to stop the test.
4.
Keyboard
To test the rubber keys. Press a key and the result will be shown on the LCD display. Note
that the
FN
key should be used in conjunction with numeral keys.
5.
Memory
To test the data memory (SRAM). Note after the test, the contents of the memory space will
be wiped out.
Ÿ
Memory
1.
Size Information
Information includes sizes of the base memory (SRAM), memory card (SRAM) and
program memory (FLASH) in the unit of kilobytes.
2.
Initialize
To initialize the data memory (SRAM). Note the contents of the data space will be wiped
out after memory initialization.
Ÿ
Power
Show the voltages of the main battery and backup battery.
Ÿ
Load Application
To download the application program, BASIC run-time or font file. There are three interfaces
supported by the system, namely, the Direct-RS232, Cradle-IR and standard IrDA.
Ÿ
433MHz / 2.4GHz RF
This item will be shown only if an RF module is installed.
1.
Settings
The RF settings and their default values are as follows,
Terminal ID
:
01
Terminal Channel
:
01
Terminal Power
:
01
