46
expansion card. Use the second item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
sub-menu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome some problems that can be caused by
some non-standard VGA cards. This board includes a built-in VGA system that
does not require palette snooping so you must leave this item disabled.
Assign IRQ for VGA/USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on
your system. Activity of the selected IRQ always awakens the system.
PC Health Status
On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Target Temperature
[Disabled]
Shutdown Temperature
[Disabled]
Vcore
+ 2.5V
+ 3.3V
+ 5V
+ 12V
3.3V Battery
System Temperature
CPU Temperature
CPU FAN speed
System Fan Speed
Menu Level
↑↑↑↑
↓↓↓↓
→
→
→
→
←
←
←
←
: Move Enter : Select
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
Target Temperature (Disabled)
This item is for CPU Throttling switch. When the CPU reached it’s target tem-
perature, the CPU Throttling will be activated. Enabling this item will protect
your CPU not to overheat, but it will reduce the CPU performance.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
