Synrad Novanta 48 Series, Руководство пользователя, Страница: 36 / 89

TECHNICAL REFERENCE PAGE | 36
Auxiliary Power Connector
– provides an optional 30 VDC @ 350 mA source for powering the UC-2000
Controller. An auto-resetting solid-state fuse limits line current. Connector power is active after 30 VDC is
applied to the laser.
Technical reference
Use information in this section as a technical reference for you Series 48 lasers.
This section contains the following information:
•
Technical overview – briefly describes Series 48 technology, design RF power supply and basic
optical setup.
•
Controlling laser power – explains various aspects of Series 48 control signals.
•
DB-9 connections – describes input/output signals and specifications for the side mounted DB-9
connector.
•
DC power/ DC sense cables -provides information about DC power and voltage sense cables.
•
Integrating Series 48 safety features – describes how to integrate Series 48 safety features into
your automated control system.
•
Series 48 general specifications – provides specifications for the Series 48 laser.
•
Model 48-1, 48-2, and 48-5 package outline drawings – illustrates laser package and mounting
dimensions for Keyswitch and OEM 48-1 (10, 25, and 50-watt lasers, respectively.
•
Series 48 packaging instructions – illustrates how to package the Series 48 lasers for shipment
using NOVANTA-supplied packaging materials.
Technical overview
The Technical overview section includes subsections:
• Introduction
• Plasma section
• Optical resonator
• Control circuitry
• Optical setup,
• Faults, cooling, and DuoLase®
Caution: Possible Equipment Damage
Small amounts of contaminants on the laser’s output window (or on any optic in the beam path) can
absorb enough energy to damage the optic. Inspect all beam delivery optics periodically for signs of
contaminants and carefully clean as required.
In dirty environments, purge laser optics using filtered air or nitrogen to prevent vapor and debris
from accumulating on optical surfaces.