12
Chapter 2: Hardware Setup
3
Insert the new memory module in the slot:
a
Push the retaining clips on the slot out to the sides.
b
Align the notch on the gold edge of the module with the notch in the memory slot.
c
Push down on the memory module with firm and even pressure. The retaining clips will snap into position as
the module is correctly inserted.
Note:
Hold the memory module by its edges, and do not touch the gold connectors.
4
Put back the rear top cover you lifted in step 2.
a
Align the hexagons at the side of rear top cover with the slots on the chassis’ edge, and push the rear top
cover back in position.
b
Put back and fasten the screw you removed in step 2.
