Synology RS2821RP+, Руководство по установке оборудования

Страница: 17 / 32

17 Chapter 2: Hardware Setup
Install PCle Add-in Cards
R provides one PCIe slot for optional add-in card expansion, allowing network interface card to be
installed.
To install network interface cards
1 Shut down your R. Disconnect all cables connected to your R to prevent any possible
damages.
2 Open your R by following step 2 of the " To install the RAM module " section.
3 Install the network interface card:
a Remove the screw that secures the expansion slot’s cover.
b Lift the expansion slot’s cover.
a b
c Align the card’s connector with the expansion slot, and insert the card into the slot.
Note:
Confirm that the connector is fully inserted. Otherwise, the network interface card might not be able to
function properly.
d Put back and fasten the screw that you removed in step 3-a to secure the newly inserted card in place.
d
c
4 Replace the rear top cover by following step 5 of the " To install the RAM module " section.