10
Chapter 2: Hardware Setup
4
Return the board into the RackStation:
a
Identify the rail within the RackStation.
b
Place the circuit board within the rail and push the board all the way in.
c
Tighten the two knobs you unscrewed in step 2.
Confirm New Memory is Recognized
After installing a new memory module in the RackStation, we recommended checking whether or not the system
recognizes the new memory.
To check the memory of the RackStation:
1
Start up your RackStation. (See “Start up the RackStation” for more information.)
2
Install DiskStation Manager (DSM). (See “Chapter 3: Install DSM on RackStation” for more information.)
3
Log in to DSM with an account belonging to the
administrators
group.
4
Check
Total Physical Memory
at
Main Menu
>
System Information
.
If the RackStation does not recognize the memory or does not start up correctly, please make sure the memory
was correctly installed.
RS814+
4096 MB
RackStation
