3.2. Access from the internet
Access from the internet once connected, the Network Camera is accessible on your local network
(LAN). To access the video encoder from the Internet you must configure your broadband router to
allow incoming data traffic to the video encoder. To do this, enable the NAT-traversal feature, which
ill attempt to automatically configure the router to allow access to the video encoder. This is enabled
e 60.
. This is
e
ername and password is “admin”. If the password is lost, the
etwork Camera must be reset to the factory default settings. See
“3.8 Resetting to the Factory
efault Settings” for more details.
o prevent network eavesdropping when setting the admin password, this can be done via an
o set the password via a standard HTTP connection, enter it directly in the first dialog shown below.
o set the password via an encrypted HTTPS connection, see “3.5.4 System > Security > HTTPS”.
ote:
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between
The HTTPS certificate controls the encrypted exchange of information.
w
from Setup > System > Network > NAT.
For more information, please see NAT traversal (port mapping) for IPv4, on pag
3.3 Setting the admin password over a secure connection
To gain access to the product, the password for the default administrator user must be set
done in the “Admin Password” dialog, which is displayed when the network camera is accessed for th
setup at the first time. Enter your admin name and password, set by the administrator.
Note:
The default administrator us
N
D
T
encrypted HTTPS connection, which requires an HTTPS certificate (see note below).
T
T
N
web browsers and servers.
17