Synology NAS SA3400 Скачать руководство пользователя страница 19

Страница: 19 / 32

Chapter 2: Hardware Setup

Press the power button on the front panel to power on your SA3400. The expansion unit ID of RX1217sas/

RX2417sas connected to SA3400 will be displayed in sequence on the back panel.

Note:

Even with the Synology NAS and expansion unit(s) powered on, you can still expand with one or more

expansion unit if needed. To do so, repeat above steps to connect the expansion cables and power cords of the other

expansion units. Your expansion units will automatically power on if they are correctly connected, and the expansion

unit ID will be displayed accordingly after a few seconds (if DSM is correctly installed in the Synology NAS server).

Start up Your Synology NAS

To start up your SA3400:

Connect one end of each power cord to the power ports located on the back of the SA3400 and the other end

to a power outlet.

Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.

Press the power button to turn on the SA3400.

Congratulations! Your Synology NAS is now online and detectable from a network computer.

Содержание NAS SA3400

































Результаты поиска

Содержание NAS SA3400

Отзывы:

Похожие инструкции для NAS SA3400

Бренды по названию

Популярные бренды

Synology NAS SA3400, Руководство по установке оборудования

Результаты поиска

Содержание NAS SA3400

Отзывы:

Похожие инструкции для NAS SA3400

Бренды по названию

Популярные бренды