Synology NAS RS2421+, Руководство по установке оборудования, Страница: 13 / 32

13 Chapter 2: Hardware Setup
• For 2.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive in place.
3 Insert the loaded drive tray into the empty drive bay.
Note: Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
4 Push the handle inward to secure the drive tray.
5 Push the switch to the left on the drive tray handle to lock the drive tray.
6 Repeat the steps above to install the other drives you have prepared.
7 Drives are numbered as shown below.
1 2 4 3
5 6 7 8
9 10 11 12
Note: If you plan to create a RAID volume, we recommend installing drives of identical size to make the best
use of drive capacity.